Rugged Obsidian 9 – NIB Old Stock

New in box – old stock

Rugged Obsidian 9

The Rugged Obsidian 9 is a modular 9mm suppressor optimized for pistols, carbines, and PCCs, and rated for .300 BLK subsonic and 350 Legend with applicable barrel length minimums. In standard configuration it measures 7.8 inches and weighs 12.7 oz. With the ADAPT Module removed it drops to 4.85 inches and 8.7 oz. Both configurations ship with one tax stamp. The Obsidian 9 has a 1.37-inch diameter, which keeps it compatible with standard pistol suppressor-height sights so you can run irons or a red dot without changing your sight setup.

Rugged Obsidian 9 Specifications

Rugged Suppressors engineers to exacting standards. Here’s exactly what you’re getting.

• Caliber rating: 9mm and pistol calibers up to 9mm, .300 BLK subsonic, 350 Legend (barrel length minimums apply — verify with Rugged Suppressors)
• Length: 7.8 inches (standard), 4.85 inches (short, ADAPT Module removed)
• Weight: 12.7 oz (standard), 8.7 oz (short)
• Diameter: 1.37 inches
• Sight compatibility: Compatible with pistol suppressor-height sights
• Baffles and mount material: 17-4 stainless steel
• Tube material: Hard coat anodized aluminum
• Finish: High-temp Cerakote
• Baffle count: 12 total (5 main stack + 7 ADAPT Module)
• Baffle indexing: 3 tabs per baffle for foolproof alignment
• Belt Fed Rated: Yes
• Full-auto rated: Yes (pistol calibers up to 9mm)
• Warranty: Unconditional Lifetime Warranty, no fine print

Cleaning and Maintenance

The Obsidian 9 is fully user-serviceable. Rugged Suppressors recommends cleaning pistons, springs, and baffles with an ultrasonic cleaner using a 50/50 mixture of Purple Power and water for approximately one hour, then removing and allowing to dry. The suppressor tube, ADAPT Module body, front cap, and spring retainer are aluminum and must not be used in an ultrasonic cleaner. Use a non-ammonia based cleaner and brush for those components. When running a booster system, lubricate the outside of the piston with white lithium grease. Check that the suppressor remains securely threaded every 30 rounds during use.